Non Hyo parts that fit
4 posters
Hyosung GB Owners Club :: Garage :: Mods
Page 1 of 1
Non Hyo parts that fit
OK guys , this thread is going to be about parts from other makes that will fit our Hyos' WITHOUT having to be altered or having brackets made .............
SOOOOO ................... first off , I have just found that the REAR MASTER CYLINDER from the Honda NTV650 Revere ( '88 - '89 model ) is a direct bolt on fit ...........
http://www.ebay.co.uk/itm/111064566417?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
The originals ( like the one in the link , which is now mine BTW ) , are Nissin cylinders BUT you can buy these new aftermarket ones here .......
http://www.wemoto.com/bikes/honda/ntv_650_j_k_revere/88-89/picture/rear_brake_master_cylinder/
Anyone else got anything they have found that is a STRAIGHT SWAP .........
Baz
SOOOOO ................... first off , I have just found that the REAR MASTER CYLINDER from the Honda NTV650 Revere ( '88 - '89 model ) is a direct bolt on fit ...........
http://www.ebay.co.uk/itm/111064566417?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
The originals ( like the one in the link , which is now mine BTW ) , are Nissin cylinders BUT you can buy these new aftermarket ones here .......
http://www.wemoto.com/bikes/honda/ntv_650_j_k_revere/88-89/picture/rear_brake_master_cylinder/
Anyone else got anything they have found that is a STRAIGHT SWAP .........
Baz
Re: Non Hyo parts that fit
Using a brake lever from a Suzuki DR125, on a GT125R.
Identical part.
Identical part.
Cloud.- Posts : 70
Join date : 2013-05-11
Location : The A35
Re: Non Hyo parts that fit
Honda VFR 400 NC30 single sided swingarm
joel352- Posts : 164
Join date : 2013-04-28
Age : 29
Location : Halifax UK
Re: Non Hyo parts that fit
joel352 wrote:Honda VFR 400 NC30 single sided swingarm
WITHOUT modification ?
Baz
Re: Non Hyo parts that fit
Surprisingly, the Grimeca brake reservoir cover which is used by MZ on the Skorpion, Mastiff and Baghira fits the Hyo front master cylinder. I wouldn't be surprised if other bits and pieces from the Grimeca range mysteriously fit straight onto the Hyo range. ( the brake master cylinders used by MZ are a diferent diameter to the single disc hyo , I didn't get around to trying out the MZ stuff on the twin disc Hyo)
Commuter- Posts : 82
Join date : 2013-04-27
Location : South Cambs
Re: Non Hyo parts that fit
Honda VFR 400 NC30 (with a few minor modifications)
joel352- Posts : 164
Join date : 2013-04-28
Age : 29
Location : Halifax UK
Hyosung GB Owners Club :: Garage :: Mods
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|